Coming Soon
Digital Machinist, Volume 5, Issue 4
Features
- LazyCam – Turning Software for the CNC Lathe
- If you’re considering a CAM program for turning, check out this free product before laying down hard-earned money.
- How I Added a Spindle Lock to my Porter Cable Router,
- This article explains how Michael made tool changes on his CNC router easier.
- Overhead Allocation: the Minefield of the Manufacturing World
- Orest has been giving us glimpses in to the world of manufacturing consulting for quite some time now. With this article, he continues to do so by explaining the importance of overhead.
- DIY Remote Control for your CNC Machine – Part Three
- Randall continues his fascinating series on building a remote control pendant for your CNC machine, making pendant control for under $100 a reality.
- Digital Height Gauge
- Using his CNC and a low-cost digital caliper, Gary built a handy little height gauge for use on his table saw.
- Along the G-Code Way - USB Jogging Pendant
- Ed is going to add a jogging pendant to his EMC2-run mill. Join him for the ride!
- The Mechatronist – A CNC X-Y Table
- Wes starts his journey into CNC by building an X-Y table for his Sherline mill.
- The Professional Digital Machinist (Presented by Tormach) – Preventing Collet Slip
- The guys from Tormach offer some suggestions on how to stop one of the most frustrating shop errors: tools slipping in their collets during