Videos

A video of a project or technique can provide the perfect supplement to a magazine article.

Click to View Digital Machinist’s video collection

Recent Videos:

The Ros-Meyer Fence by Bob Roswick

From Bob Roswick’s article “The Rosmeyer Fence” in the Spring 2023 issue of Digital Machinist.

Safer Probing by Ken Strauss

From Ken Strauss’s article “Safer Probing” in the Winter 2022 issue of Digital Machinist.

Intro to Super Glue Workholding by NYC CNC

From Ken Strauss’s article “Safer Probing” in the Winter 2022 issue of Digital Machinist.

LMS 3990 Servo CNC Conversion by John O’Brien

The LEDS in action! From John O’Brien’s article “LMS 3990 Servo CNC Conversion” in the Fall 2021 issue of Digital Machinist. 

“Adding a New Tool to My Toolbox – Fusion 360” by Robert Roswick

It runs! Using Fusion 360, Mr. Roswick designs a solenoid driven model engine. He discusses this journey and more in his article in the Fall 2018 issue of Digital Machinist. 

“Centroid Acorn CNC System at Work” by Rick Sparber

The first cut used the X and A axes as Rick machined a helix in a piece of PVC pipe. The Centroid Acorn CNC System was discussed in the Beta Testing section of the Winter 2017 issue of Digital Machinist. 

“Centroid Acorn CNC System Finding Home” by Rick Sparber

Rick says, “The first thing the Centroid Acorn system does is ask to be taken “home.” Home is just a known physical location. Once the software reaches home, it can get to work making parts.”  The Centroid Acorn CNC System was discussed in the Beta Testing section of the Winter 2017 issue of Digital Machinist.